LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (2.0L - Crankshaft Drive - Engine Code(S): CJAA & CVCA (Convertible)) >> 13 Crankshaft Drive >> Specifications >> Fastener Tightening Specifications >> Notes

Fastener Tightening Specifications: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Fastener Size Nm
Air Conditioning Compressor to Accessory Bracket Bolt - 45
Connecting Rod Cap to Connecting Rod Bolt1 - 30 + 90°
Crankshaft Bearing Cap to Cylinder Block Bolt1 - 65 + 90°
Crankshaft Toothed Belt Gear to Crankshaft Bolt1 - 120 + 90°
Engine Speed Sensor - 5
Flywheel to Crankshaft Bolt1 - 60 + 90°
Oil Spray Jet to Cylinder Block Bolt - 27
Ribbed Belt Tensioner1 - 20 +90°
Toothed Belt Idler Roller to Cylinder Block Bolt2 - 15
- 50 + 90°1