Vibration Damper: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Tightening specifications. Refer to -item 4-.

-- Install the vibration damper with new bolts.

Fig 1: Installing Crankshaft Belt Pulley With Original Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

It is possible to install in one position only: the hole in the vibration damper must be above the protrusion on the toothed belt sprocket -arrow-.