LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (2.0L - Crankshaft Drive - Engine Code(S): CJAA & CVCA (Convertible)) >> 13 Crankshaft Drive >> Removal And Installation >> Ribbed Belt TENSIONING Damper >> Installing

Ribbed Belt TENSIONING Damper: Installing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Replace the bolt for the tensioning element.

-- Install the ribbed belt. Refer to RIBBED BELT WITH TENSIONER AND A/C COMPRESSOR .

scientia non olet · About LEMON Manuals