LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (2.0L - Crankshaft Drive - Engine Code(S): CJAA & CVCA (Convertible)) >> 13 Crankshaft Drive >> Removal And Installation >> Crankshaft Seal, Replacing, Belt Pulley Side >> Tightening Specification

Tightening Specification

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Component Tightening specification
Center bolt for the crankshaft toothed belt gear
  • Replace
 120 Nm +90°
Toothed belt Refer to TOOTHED BELT .
scientia non olet · About LEMON Manuals