Cylinder Head Seal Identification

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Cylinder Head Gasket Identification

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Part number = arrow 1
Holes = arrow 2
Control code = arrow 3 (ignore this!)

NOTE:

Depending on piston projection, varying cylinder head gasket thicknesses can be installed. Be sure to use a gasket having the identical identification when replacing.

Determine the piston position at "TDC" when installing new pistons or a partial engine. Refer to PISTON PROJECTION, MEASURING AT TDC .