Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Components | Fastener Size | Nm |
|---|---|---|
| Accessory assembly bracket - tightening specifications and tightening sequence | - | Refer to Figure |
| Bearing cap bolt 1 | - | 65 +90° |
| Connecting rod bearing cap bolt 1 | - | 30 +90° |
| Engine support - tightening specification and sequence | Refer to Figure | |
| Flywheel bolt 1 | 60 +90° | |
| Ribbed belt transmission side sealing flange - tightening specifications and sequence | - | Refer to Figure |
| Ribbed belt tensioner bolt 1 | - | 20+90° |
| Vibration damper bolt 1 | - | 10 +90° |
|
||