Removal And Installation: Flywheel: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed.
CAUTION:
Danger of causing damage to the flywheel.
- Remove the bolts -B- by hand. Do not use an air-powered or impact wrench.
- When removing bolts, ensure bolt head does not come in contact with the flywheel.
- Turn the flywheel -A- until the bolts -B- line up with the holes -arrows-.
-- Insert the Flywheel Retainer3067 into the hole on the cylinder block -B-, and loosen the flywheel bolts.
-- Remove the bolts and the flywheel.