LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (2.0L - Crankshaft, Cylinder Block - Engine Code: CVCA (Convertible)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Engine Support >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Step Bolts Tightening Specification/Additional Turn
1. -1 to 3- 7 Nm
2. -1 to 3- 40 Nm
3. -1 to 3- 180° additional turn
scientia non olet · About LEMON Manuals