Engine Support: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the engine mount, refer to ENGINE MOUNT .

-- Remove the upper toothed belt guard, refer to TOOTHED BELT GUARD .

-- Raise or lower the engine using the Engine Support Bridge - Spindle10-222A/11 until each bolt in the engine support is accessible.

NOTE:

The bolt -2- can only be removed after the engine support is removed.

-- Remove the bolts -1, 2 and 3- and engine support.

Fig 1: Identifying Engine Support And Bolts

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.