LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (1.8L & 2.0L - Crankshaft, Cylinder Block - Engine Code(S): CPLA, CPKA, CPPA & CPRA (Convertible)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Cylinder Block, Transmission Side >> Flywheel >> Installing

Cylinder Block, Transmission Side: Flywheel: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the bolts were tightened with an additional turn.

-- Insert the Flywheel Retainer 3067 into the hole on the cylinder block -A-.

Fig 1: Identifying Flywheel Retainer
GWWN13-10563Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
scientia non olet · About LEMON Manuals