LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (1.8L & 2.0L - Crankshaft, Cylinder Block - Engine Code(S): CPLA, CPKA, CPPA & CPRA (Convertible)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER >> Installing

Ribbed Belt TENSIONER: Installing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Install the ribbed belt, refer to RIBBED BELT .

-- Remove the right wheel housing liner, refer to REMOVAL AND INSTALLATION .

scientia non olet · About LEMON Manuals