LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (1.8L & 2.0L - Crankshaft, Cylinder Block - Engine Code(S): CPLA, CPKA, CPPA & CPRA (Convertible)) >> 13 Crankshaft, Cylinder Block >> Removal And Installation >> Cylinder Block, Belt Pulley Side >> Crankshaft Seal, Belt Pulley Side >> Removing

Crankshaft Seal, Belt Pulley Side: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, and 2014 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Seal Installer - Crankshaft T40274
GWWN13-10592Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the vibration damper, refer to VIBRATION DAMPER .

-- Remove the shaft seal with the Seal Installer - Crankshaft T40274.

scientia non olet · About LEMON Manuals