Right/Left Front Abs Wheel Speed Sensor -G45- / -G47-: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Clean the inner surface of the opening before inserting the Front Speed Sensor --.
-- Coat the inner surface all around with Hot Bolt Paste G 052 112 A3.
-- Install the Front Speed Sensor -- into the hole in the wheel bearing housing and tighten it.