ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, 4-CYLINDER DIESEL ENGINE WITH EMISSIONS CONTROL MODULE: Notes

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Wrench 1331 5-50 Nm VAG1331
Open Ring Spanner Insert - AF 11 mm VAG 1410/6
Torque Wrench - Universal Joint VAG 1410/7
Mini Torque Wrench VAS 6854
Brake Pedal Actuator VAG 1869/2.
Torque Wrench - Assembly Tool VAG 1410/8
Ring Wrench 7-Piece Set 3337
Wrench - Sw13 T10384
Hydraulic Press - Subframe Assembly Tools T10365
Transportation Lock T10404
Engine Bung Set VAS 6122
Hose Clip Pliers VAS 6340
Bleeder Bottle
Brake Bleeding Tool Set VAS 6564

Fig 1: Plug 5 Q0 698 311

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

1 -

M10 plug

2 -

M12 plug

Fig 2: Identifying Sealing Plug Repair Set, Part No. 1 H0 698 311 A

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Install the transportation protection after removing the ABS Hydraulic Unit -N55-.

The warranty on the ABS Hydraulic Unit -N55- will not be honored if there is no transportation protection.

1 -

Transport protection for valve body (foam)

2 -

Sealing plugs M10

3 -

Sealing plugs M12