Wheel Bearing Seal: Removing

WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosen the wheel bolts.

-- Raise the vehicle.

-- Remove wheel.

-- Remove ABS wheel speed sensor from wheel bearing housing.

-- Wheel Bearing Unit, Removing WHEEL BEARING UNIT, MULTI-LINK SUSPENSION .

-- Remove the wheel bearing seal -1- from the wheel bearing housing -2-.

Fig 1: Identifying Puller

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

3 - Three Arm Extractor Kukko 45-2

4 - Thrust Piece 3002

NOTE:

Make sure no parts fall down when removing.