Tension Struts Overview
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 40 Nm +45°
- Replace after removal.
- Right Tension Strut
- Removing and Installing. Refer to TENSION STRUTS .
- Subframe
- Bolt
- 90 Nm +45°
- Replace after removal.NOTE:
Tension strut screws to subframe should only be tightened when vehicle is resting on wheels.
- Left Tension Strut
- Removing and Installing. Refer to TENSION STRUTS .