Fastener Tightening Specifications
WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
| Component | Fastener Size | Nm |
|---|---|---|
| Clamping Sleeve Nut - | ||
| - Individual Clamp | - | 25 |
| - Continuous Clamp | - | 35 |
| Connecting Pipe to EGR Housing | - | 23 |
| Control Line Nut to Housing | - | 23 |
| Control Line to Exhaust Manifold Nut | - | 10 |
| Control Line to Particulate Filter Fitting | - | 45 |
| EGR Cooler to EGR Housing | - | 8 |
| EGR Filter to Turbocharger Nut | - | 23 |
| EGR Housing | - | 8 |
| EGR Temperature Sensor | - | 20 |
| EGR Valve 2 | - | 8 |
| Exhaust Gas Recirculation Filter to Particulate Filter Clamp | - | 3.5 |
| Exhaust Gas Temperature Sensors | - | 45 |
| Muffler Brackets | - | 25 |
| Oxygen Sensor | - | 52 |
| Particulate Filter Bracket to Particulate Filter/Cylinder Head Bolt/Nut | - | 23 |
| Particulate Filter to NOx Reduction Catalytic Converter Clamp1 | - | 7 |
| Particulate Filter with NOx Reduction Catalytic Converter to Exhaust Door Control Unit Clamp1 | - | 7 |
| Particulate Filter Shield Bolt | - | 10 |
| Particulate Filter Suspended Mount to Subframe Bolt | - | 25 |
| Particulate Filter to Turbocharger Clamp1 | - | 7 |
|
||