LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 100 (2.0L - Engine Coolant System - Engine Code(S): CJAA & CVCA (Convertible)) >> 19 Engine Coolant System >> Removal And Installation >> Radiator >> Removing

Removal And Installation: Radiator: Removing

WARNING: This page is about a different car, the 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the fan shroud together with the radiator fan. Refer to FAN SHROUD WITH COOLANT FAN .

-- Release the retaining clamp -arrow-.

Fig 1: Identifying Upper Coolant Hose
GWWN19-10623Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the upper radiator coolant hose -1-.

-- Release the coolant hose clips -arrow-, and remove the coolant hose from the right quick release couplings for the radiator.

Fig 2: Identifying Lower Coolant Hose
GWWA19-0482Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the radiator bolts -arrows- and remove the radiator upward.

Fig 3: Locating Radiator Bolts
GWWN19-10625Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.