Valve Stem Seals, Removing And Installing, Cylinder Head Installed: Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Spark Plug Removal Tool 3122B
Puller - Valve Seal 3364
Seal Installer - Valve Stem 3365
Valve Cotter Tool Kit VAS 5161A with Valve Cotter Tool Kit - Guide Plate 19c VAS 5161/19C or as an alternative Valve Cotter Tool Kit - Guide Plate 19B VAS 5161/19B
Valve Cotter Tool Kit - Adapter T40012

Reworking the Valve Cotter Tool Kit - Guide Plate 19C VAS 5161/19C:

Fig 1: Identifying Valve Cotter Tool Kit - Guide Plate 19B VAS 5161/19B

Courtesy of AUDI OF AMERICA, LLC

NOTE: In place of the Valve Cotter Tool Kit - Guide Plate 19C VAS 5161/19C, the Valve Cotter Tool Kit - Guide Plate 19B VAS 5161/19B may also be used. To do this, the following reworking must be completed as follows:

-- Lengthen the long opening to 2 mm as shown.

NOTE: To use this, the guide plate is only attached to the cylinder head with a knurled bolt.