Overview - Generator
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 23 Nm
- Generator
- Removing and installing, refer to GENERATOR, REMOVING AND INSTALLING .
- Terminal 30/B+
- Nut
- 16 Nm
- Cap
- Depending on the vehicle equipment level
- Connector
- Coolant Return Pipe
- Bolt
- 9 Nm
- Retaining Plate
- For the coolant pipes
- Coolant Supply Pipe
- O-Rings
- Replace
- Bushing
- Because the clamping force of a tight socket is too low despite the correct torque, loosen sockets