Special Tools
WARNING: This page is about a different car, the 2014 Volkswagen Tiguan, 2013 Volkswagen Tiguan, and 2012 Volkswagen Tiguan. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Carrier Bearing Installation Tool 3350
- Thrust Piece T10266
- Tube 60 mm Dia. VW 415 A
- Base Block VW 441
- Gearbox Holder 2004/1
- Thrust Plate 2050
- Thrust Pad 3062
- Press Support 3118
- Thrust Washer 3401
- 2-Arm Puller 20/10
- Thrust Pad Con. 8/65 VW 433
- Support Channels VW 457
- Thrust Pad VW 510
- Holding Fixture VW 801
- Thrust Pad 30-11
- Thrust Piece 40-105
- Tapered Roller Bearing Puller V.A.G 1582
- Attachment to V.A.G 1582 V.A.G 1582/4
- Grip V.A.G 1582/7
- Press Appliance VW 459
- Split Tube VW 463/2
- Thrust Piece VW 473
- Front and Rear Bearing Tool 3348
- Tube Trans. Drive Shaft VW 426
- Pulling Hook T20143/1
- Thrust Piece T10233
Special tools and workshop equipment required
- Thrust Plate VW 401
- Thrust Plate VW 402
- Punch VW 407
- Punch VW 408 A
- Thrust Disc VW 412
- Thrust Tube VW 454
Special tools and workshop equipment required
- Thrust Tube VW 455
- Sleeve VW 519
- Press Tube 2040
- Pressure Washer 3074
- -1- Kukko Extractor 14.5-18.5 mm21/2
- -1- Kukko Extractor 37-46 mm 21/5
- -1- Kukko Extractor 37-46 mm 21/6
- -1- Kukko Extractor 46-58 mm 21/7
- -1- Kukko Extractor 56-70 mm 21/8
- -1- Kukko Extractor 56-110 mm 21/89
- -2- Kukko Puller 65-160 mm 18/1
- -3- Kukko Separating Tool 22-75 mm 17/1
- -3- Kukko Separating Tool 22-115 mm 17/2
- -4- Kukko Support 22/1
- -4- Kukko Support 22/2
- -4- Kukko Support 22/4
Special tools and workshop equipment required
- Thrust Pad 16.5/28 mm Dia. VW 431
- Arbor 50 mm Dia. VW 432
- Thrust Pad VW 447 i
- Tube 42 mm Dia. VW 516
- Thrust Pad 30-205
- Thrust Piece 40-105