Fastener Tightening Specifications: Notes

Component

Fastener Size

Bracket to cylinder block bolt ⁽²⁾

Bracket to turbocharger bolt ⁽²⁾

-- GTI⁽⁴⁾ - charge air pipe bolt

-- Eos, Tiguan, Passat, CC and GTI⁽⁴⁾ - charge air pipe bolt

Charge air pipe clamp

5.5

Charge air pressure sensor to charge air pipe bolt

Connection to turbocharger bolt

Coolant return pipe to turbocharger banjo bolt

Coolant return pipe to turbocharger bolt

Coolant supply pipe to cylinder block banjo bolt

Coolant supply pipe to cylinder block bolt

Coolant supply pipe to turbocharger banjo bolt

Drive axle heat shield bolt

Fastening strip to cylinder head nut ^{1, 3}

Heat shield to cylinder head bolt

Mount to charge air cooler bolt

Noise generator to bracket bolt ⁽⁵⁾

Noise generator bracket to plenum chamber bulkhead nut ⁽⁵⁾

Oil return pipe to cylinder block bolt

Oil return pipe to turbocharger bolt

Oil supply pipe to cylinder block bolt

Oil supply pipe to turbocharger banjo bolt

Oil supply pipe to turbocharger bolt

Plenum chamber bulkhead bolt ⁽⁵⁾

Structure-borne sound actuator to structure-borne sound actuator bracket nut ⁽⁶⁾

Structure-borne sound actuator bracket to plenum chamber bolt ⁽⁶⁾

Structure-borne sound control module bracket to plenum chamber nut ⁽⁶⁾

Structure-borne sound control module to structure-borne sound control module bracket bolt ⁽⁶⁾

Turbocharger recirculation valve to turbocharger bolt

Vacuum diaphragm to turbocharger bolt

Wastegate bypass regulator valve to turbocharger bolt

⁽¹⁾	Always replace.

⁽²⁾	Lubricate the bolt with Hot Bolt Paste G 052 112 A3.

⁽³⁾	Lubricate the studs of the exhaust manifold with Hot Bolt Paste G 052 112 A3.

⁽⁴⁾	For bolt clarification for the GTI only, refer to -5 and 14- in the .

⁽⁵⁾	GTI (2008 through 2009) and GTI (from MY 2010).

⁽⁶⁾	GTI (from MY 2010).