LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Tiguan SE, AWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> 2.0L - Turbocharger & Supercharger - Engine Code: CCTA >> 21 Turbocharger, Supercharger >> Removal And Installation >> Turbocharger >> Tightening Specifications

Tightening Specifications

Component   Nm
Turbocharger to the cylinder head nuts1, 2 Follow the tightening sequence, refer to Figure.
Oil supply pipe to turbocharger (M12) banjo bolt 33
Oil return pipe to turbocharger bolt 9
Coolant supply pipe to turbocharger (M14) banjo bolt (Tighten using the Bits for VAG 1331/13 T10099) 38
Turbocharger bracket to cylinder block bolt(2) 30
Turbocharger bracket to turbocharger bolt(2) 30
Right charge air pipe to oil pan bolt 10
Heat shield to cylinder head (M8 and M12) bolts 20
(1) Always replace.
(2) Use Hot Bolt Paste G 052 112 A3.
scientia non olet · About LEMON Manuals