Overview - Rear Lid, Locking And Unlocking Components
- Lid Latch
- Removing and installing, refer to REAR LID LATCH .
- Bolt
- Tightening specification 23 Nm.
- Quantity: 2
- Grip with Button
- Tightening specifications for bolts: 2 Nm
- Removing and installing, refer to REAR LID GRIP WITH RELEASE BUTTON .
- Connectors
- For the rearview camera
- Button
- The button with rearview camera is shown here
- Is clipped into the grip
- Nut
- Tightening specification: 4 Nm
- Quantity: 2
- Bolt
- Tightening specification 1 Nm.
- 2 each per lamp
- License Plate Lamp
- Connector
- For lid lock
- Insert Nut
- Quantity: 2
- Connector
- For license plate lamp
- Connector
- For the button