LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Tiguan Limited, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Wheels, Tires & Wheel Alignment (Suspension, Wheels And Steering) >> 44 Wheels, Tires, Wheel Alignment >> General Information >> Rear Axle Camber, Adjusting >> Tightening Specifications

Tightening Specifications

Component Tightening Specification
Upper transverse link to subframe (vehicles with AWD)
  • Use new nut
  • Tighten screws in curb weight position
 95 Nm
  • Adjust Torque Wrench 1332 40-200 Nm VAG 1332 to 80 Nm when tightening nut.
  • only applies in conjunction with Insert Tool - 18 mm T10179
scientia non olet · About LEMON Manuals