Version 1

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Connector coupling with right and left release buttons -arrows-.

Opening

It is necessary to counter-hold the fuel coupling point -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the :T10468  between the heat shield and the fuel line stop -arrow- -2- and counter-hold it.

Continuation for all coupling points on the fuel system

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the connector coupling -1- in the direction of the -arrow A-.

-- Press the release buttons and hold it down.

-- Disconnect the connector coupling -1- from the fuel line -2- in the direction of the -arrow B-.

Note the color coding when installing. Refer to CONNECTOR COUPLINGS, DISCONNECTING .

-- Pull on the connector coupling to check for secure fit.