Secondary Air Injection Pump Motor -V101-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION .
-- Disconnect the connector -2-.
-- Remove the bolt from the heat shield on the secondary air injection pump -1-.
-- Remove the -red- connecting pipes from the secondary air injection pump -1-. To do so, push the locking ring together on both sides.
-- Remove both bolts -arrows- and remove the secondary air injection pump downward.