Catalytic Converter, Removing And Installing: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Jetta and 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
NOTE:
Replace the seal and self-locking nuts.
Coat the exhaust manifold stud bolts with hot bolt paste. Refer to the parts information for the hot bolt paste.
-- Insert the screwdriver -2- into the opening -arrow- on the turbocharger.
-- Pry out the seal -1-.
-- Replace the seal -1-.
NOTE:
Replace the seal and self-locking nuts.
Coat the exhaust manifold stud bolts with hot bolt paste. Refer to the parts information for the hot bolt paste.
-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .