Exhaust System, Installing Without Tension: Notes

WARNING: This page is about a different car, the 2015 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.

Mandatory Replacement Parts

Gasket - Exhaust Manifold to Front Exhaust Pipe
Nut - Exhaust Manifold to Front Exhaust Pipe

Special Tools And Workshop Equipment Required

Torque Wrench 1331 5-50Nm :VAG1331

NOTE:

After exhaust system repairs, make sure exhaust system is not under stress and is far enough from the body. If necessary, loosen the clamping sleeve and align the muffler and front exhaust pipe so that there is enough clearance all the way around. The suspended mounts must be loaded evenly.

Replace seals and self-locking nuts.

Exhaust system must be aligned when it is cool.