LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Jetta GLI, Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING >> Removing

Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Unclip the coolant and fuel lines and set them aside.

-- Disconnect the connector -1- from the Camshaft Adjustment Valve 1 -N205-.

GWWM15-10017Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Place a clean cloth under the camshaft adjustment valves.

-- Remove the bolts -arrows- and then the Camshaft Adjustment Valve 1 -N205- -2-.

scientia non olet · About LEMON Manuals