Vibration Damper Sealing Ring, Replacing: Installing

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Clean the contact and sealing surface.

-- Push the seal -arrow- on the :T10354  .

• The closed side of the seal points to the :T10354  .

-- Push the seal -arrow- with the :T10354  on the :T10531/2  and place on the lower timing chain cover.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Additionally attach the :T10375  and tighten the :T10531/4  .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Drive the seal in all the way using the :T10354  .

Further assembly is performed in the reverse order of the removal. Note the following:

-- Install the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .