LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Jetta GLI, Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA) >> 15 Cylinder Head, VALVETRAIN >> Intake And Exhaust Valves >> Valve Guides, Checking >> Test Sequence

Test Sequence

GWWN15-10914Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Insert the valve into guide. The valve stem end must be flush with the guide. Due to differences in valve stem diameter, make sure that only intake valves are used to check intake valve guides, and only exhaust valves are used to check exhaust valve guides.

-- Determine the tilting clearance.

scientia non olet · About LEMON Manuals