LEMON Manuals
: Even more car manuals for everyone
Home
>>
Volkswagen
>>
2017
>>
Jetta GLI, Automatic DCT Trans
>>
Repair and Diagnosis
>>
Engine Mechanical
>>
Mechanical
>>
Engine System (Cylinder Head & VALVETRAIN System - Service Information - 1.8L; 2.0L TFSI - CPLA, CPPA, CPKA, CPRA)
>>
15 Cylinder Head, VALVETRAIN
>>
Chain Drive
>>
Overview - Balance Shaft Drive Chain
>>
Bearing/Mounting Pin
Bearing/Mounting Pin
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Replace and lubricate the O-ring -1-
The alignment pin -arrow- for the bearing pins must engage in the hole in the cylinder block.
Lubricate the bearing pins