Overview - Charge Air System: Notes

Fig 1: Exploded View Of Charge Air System

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Air Duct Hose
- Installing. Refer to Air Hose Clamp Sizes Identification .
Rubber Bushing
- For the charge air cooler
- Left
Bolt
- 8 Nm
Charge Air Cooler
- Removing and installing. Refer to CHARGE AIR COOLER, REMOVING AND INSTALLING .
Rubber Bushing
- For the charge air cooler
- Right
Bolt
- 8 Nm
Rubber Bushing
- For lower charge air cooler in body
- Right
Rubber Bushing
- For lower charge air cooler in body
- Left
Gasket
- Replace if damaged
Bolt
- 7 Nm
Air Duct Hose
- Installing. Refer to Air Hose Clamp Sizes Identification .
Spring Clip
- Check for proper seating
Bolt
- 7 Nm
Air Duct Pipe
Bolt
- 7 Nm
Air Duct Pipe
Bolt
- 7 Nm
O-ring
- Is a component of the Charge Air Pressure Sensor - G31-
Charge Air Pressure Sensor -G31-
- Replace the Charge Air Pressure Sensor -G31- after removal
- Removing and installing. Refer to Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING .
Air Duct Hose
- Installing. Refer to Air Hose Clamp Sizes Identification .