LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Jetta GLI, Automatic DCT Trans >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Fuel Supply System (Service Information - Gasoline Engines - CNLA, CPLA, CPPA, CPKA, CPRA, CBPA, CZTA) >> 20 Fuel Supply >> EVAP System >> Leak Detection Pump, Removing And Installing >> Removing

Leak Detection Pump, Removing And Installing: Removing

-- Remove the right rear wheel housing liner. Refer to WHEEL HOUSING LINER .

Vehicles With Pressure Regulating Valve 

GWWM20-10051Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the connector -3- from the pressure regulating valve -1-.

-- Disconnect connecting line -2- and remove from the pressure regulating valve -1-.

-- Remove the nuts -arrows- and the pressure regulating valve -1- from the bracket.

Continuation For All Vehicles 

GWWM20-10055Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Disconnect the vent line -2- from the Leak Detection Pump -V144- -1-.

-- Disconnect the connector -3- from the Leak Detection Pump -V144- -1-.

-- Remove the nuts -arrows- and remove the Leak Detection Pump -V144- -1- with the bracket.