Overview - Hinge
- Rear Lid
- Removing and Installing. Refer to REAR LID, REMOVING AND INSTALLING .
- Adjusting. Refer to REAR LID, ADJUSTING .
- Bolts
- 9 Nm
- Quantity: 2 per hinge
- Hinge
- If equipped: Hinge Cover, Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Gas-Filled Strut
- Removing and Installing. Refer to GAS-FILLED STRUT, REMOVING AND INSTALLING .
- Venting. Refer to GAS-FILLED STRUT, VENTING .
- Wire
- Clipped to the hinge
- Bolt
- 9 Nm
- Quantity: 4 on each hinge
- Spring
- Left and right
- Engaged in the left hole -arrow-