Overview - Hood
- Hood
- Removing and Installing. Refer to HOOD, REMOVING AND INSTALLING .
- Adjusting. Refer to HOOD, ADJUSTING .
- Insulation
- Removing and Installing. Refer to INSULATION, REMOVING AND INSTALLING .
- Rubber Buffer
- Right and left
- Seal
- Right
- Removing and Installing. Refer to SEALS, REMOVING AND INSTALLING .
- Bolts
- 10 Nm
- Quantity: 2
- Striker
- Removing and Installing. Refer to STRIKER, REMOVING AND INSTALLING .
- Adjusting. Refer to Striker, Adjusting .
- Seal
- Left
- Removing and Installing. Refer to SEALS, REMOVING AND INSTALLING .
- Adjusting Buffer
- Right and left
- Hinge
- Removing and Installing. Refer to HINGES, REMOVING AND INSTALLING .
- Adjusting. Refer to HOOD, ADJUSTING .
- Nuts
- 22 Nm
- Quantity: 2 on each side
- Bolts
- 22 Nm
- Quantity: 2 on each side
- Support Rod
- Removing and Installing. Refer to SUPPORT ROD, REMOVING AND INSTALLING .
- Latch
- Removing and Installing. Refer to LATCH, REMOVING AND INSTALLING .
- Adjusting. Refer to Latch, Adjusting .
- Bolts
- 12 Nm
- Quantity: 2