Diagnostic Mode 09 - Read Vehicle Information
Diagnostic Mode 09 makes it possible to access vehicle specific information from the control modules (where applicable).
NOTE:
Depending on the scan tool and protocol used, Diagnostic Mode 09 and the information provided may be referred to by a different name.
Test Requirement
- No DTCs stored in the DTC memory.
Procedure
-- Connect the scan tool.
-- Switch the ignition on.
-- Select Mode 09: Vehicle information.
-- Select the desired Test ID.
-- The information requested will be displayed on the scan tool screen.
The following table is a numerical list of all Test IDs that may be selected.
| Test-ID | Diagnostic text | |
|---|---|---|
| $02: | Vehicle Identification number e.g. | |
|
||
| $04: | Calibration ID with REC | |
|
||
| $06: | Check Sum | |
|
||
| $08: | In-use Performance Tracking information (CAN) | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
|
-- 0... 65535 cnts | |
| $0A: |
|
-- Switch the ignition off.