Monitor-ID $A5: Mis-Fire Cylinder 4 Data
-- CONNECT: Scan Tool
-- START ENGINE: Idle
-- SELECT: Mode 06
-- SELECT: "Monitor-ID $A5"
-- SELECT: "Test-ID".
-- CHECK: values listed below at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $0B | P0304 | Average value over 10 DCYs | 0.0 cnts | 65, 535.0 cnts | Refer to DTC P0304 in the DTC summary table. Engine Control Module --, 2016 MY => P0304 . |
| $0C | P0304 | Combustion misfires in this DCY | 0.0 cnts | 65, 535.0 cnts | Refer to DTC P0304 in the DTC summary table. Engine Control Module --, 2016 MY => P0304 . |
-- Switch the ignition OFF.
-- If any of the components or systems fail to meet the specified values, refer to Diagnostic Mode 03: Interrogating Fault Memory to check for stored DTCs or the corresponding diagnostic repair procedure.