Monitor-ID $35: Camshaft adjustment / IVVT diagnosis bank 1
-- CONNECT: Scan Tool
-- START ENGINE: Idle
-- SELECT: Mode 06
-- SELECT: "Monitor-ID $35"
-- SELECT: "Test-ID".
-- CHECK: values listed below at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $80 | P0011 | VVT Intake camshaft diagnosis, specified position is not reached, Target Error | 0.0° CRK | 10.0° CRK | Refer to DTC P0011 in the DTC summary table. Engine Control Module --, 2016 MY => P0011 . |
| $81 | P000A | VVT Intake camshaft diagnosis, specified position is reached too slowly, Slow Response | 10.0° CRK | 655.35° CRK | Refer to DTC P000A in the DTC summary table. Engine Control Module --, 2016 MY => P000A . |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition OFF.