LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Transmission System (Controls & Housing - Service Information - 6-Speed Dual Clutch - 0D9)) >> 34 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications

Transmission Tightening Specifications

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Transmission to Engine

Fig 1: Transmission Tightening Specifications
GWWA34-10045Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Item Bolt Nm
1 M12 x 55 80
  • With Insert Tool - 18mm T10179: >>65 Nm<<
2 M10 x 45
  • Starter to transmission
40
3 M12 x 55
  • Is accessible only through the opening in the removed starter
80
4 M10 x 45 or M10 x 40
  • Starter to transmission
40
5 M12 x 65 or M12 x 70 80
6 M10 x 50 40
7 M10 x 50 40
8 M10 x 50 40
9 M12 x 65 or M12 x 70 or M12 x 80 80
10 M12 x 55 80
  • With Insert Tool - 18mm T10179: >>65 Nm<<
A Alignment sleeves for centering
Component Tightening Specification
Wiring bracket on the oil pan. 10 Nm
Transmission Coolant Valve -N488- bolts 9 Nm