Transmission Fluid Level, Checking: Filling
-- Install the :VAS6262A into the check hole hand-tight.
Shake bottles well before opening so that the settled components at the bottom of the bottle are mixed sufficiently with the oil.
-- Attach the :VAS6262A to the fluid bottle. Pay attention to the instructions while doing so. Refer to TRANSMISSION FLUID LEVEL, CHECKING .
-- Fill 1.0 liters (1.05 quarts) of transmission fluid.
-- Remove the :VAS6262A at the quick-release coupling and check it.
If Fluid Flows out of the Adapter Hole:
The fluid must not be topped off.
-- Let the excess fluid drain.
-- As soon as the fluid has run out (it begins to drip), remove the :VAS6262A and install the screw with new gasket.
If No Fluid Flows out of Hole:
-- Another liter (1.05 quarts) must be added.
Too little or too much fluid will impair the transmission.
Insert the fluid drain plug and check plug with a new seal and tighten them.