Transmission Fluid Cooler, Removing And Installing: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clamps - Up To 25 mm:3094
- Torque Wrench 1331 5-50Nm:VAG1331
- Engine Bung Set:VAS6122
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Transmission Fluid Cooler
- O-rings - Transmission Fluid Cooler