Selector Lever Cable, Checking And Adjusting: Notes
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Wrench 1331 5-50Nm:VAG1331
Always Adjust the Selector Lever Cable If:
- The selector lever cable was removed from the transmission.
- The engine and (or) transmission were removed and installed.
- Sections of the subframe mount were removed and installed.
- The cable itself or the selector mechanism was removed and installed.
- The engine/transmission position was changed, for example, were installed without tension.