Vehicles with Diesel Engine and Radiator Version >>2<<

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the left lower coolant hose from the radiator. Refer to COOLANT, DRAINING AND FILLING [For engine(s) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA] or COOLANT PIPES, REMOVING AND INSTALLING [For engine(s) CRUA] .

Vehicles, on Which the Coolant Was Drained

NOTE:

Before the coolant level is checked and filled the oil level in the transmission must be first be correctly adjusted.

-- Fill with coolant to the "max." marking. Refer to COOLANT, DRAINING AND FILLING [For engine(s) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA] .

Continuation for All Vehicles

Filling the fluid and checking the level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .

-- After the fluid level in the transmission is correctly set, check the coolant level. Refer to COOLANT, DRAINING AND FILLING [For engine(s) CNSB, CNSA, CXBB, CXBA, CXCB, CXCA] .

-- Install the noise insulation. Refer to NOISE INSULATION .

-- Perform a basic setting on the DSG Transmission Mechatronic -J743-.

NOTE:

After installing a >>new<< Mechatronic, reprogram the immobilizer.