Tightening Specification and Sequence for Transmission Fluid Pump
WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
NOTE:
Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts in steps as follows:
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1 |
Upper Countersunk Bolt |
8 Nm with :T10054 |
| 2 |
Flat Head Bolts |
8 Nm |
| 3 |
Flat Head Bolts |
90° additional turn |