LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Transmission System (Controls & Housing - Service Information - 6-Speed Dual Clutch - 0D9)) >> 34 Controls, Housing >> Bevel Box >> Bevel Box, Installing >> Notes

Bevel Box, Installing: Notes

WARNING: This page is about a different car, the 2017 Volkswagen GTI, 2016 Volkswagen GTI, 2015 Volkswagen Golf, and 2015 Volkswagen GTI. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

Refer to "Bevel Box, Removing" to get a list of the special tools needed. Refer to BEVEL BOX, REMOVING .

Replace self-locking bolts and nuts after removing them.

Replace bolts that were tightened with an additional turn after removing them.

Reinstall all cable ties that were loosened or cut off during removal at the same locations during installation.

Lightly grease the flange shaft splines using Grease for Clutch Plate Splines.