Fuel Level Sensor -G-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.
-- Observe the safety instructions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to PARKING/AUXILIARY HEATER AND FUEL SYSTEM CLEAN WORKING CONDITIONS .
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Unlock and disconnect the connector -2- from the sealing flange.
-- Disengage and free up the wires on the bracket -A arrows-.
-- Release the catches -1 and 3-.
-- To do this push the catches in the direction of the -arrow B-.
-- Remove the Fuel Gauge Sensor -G- upward in the direction of the -arrow C-.