LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2017 >> Golf S, Eng CD CXBA, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Assembly (Service Information - CRUA)) >> 10 Engine Assembly >> Engine, Removing And Installing >> Engine And Transmission, Separating >> Engine And Transmission, Separating, Vehicles With Manual Transmission >> Procedure

Engine And Transmission, Separating, Vehicles With Manual Transmission: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the starter. Refer to STARTER, REMOVING AND INSTALLING .

-- Remove the bolts -arrows- and remove the transmission support.

GWWA10-1683Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the :T40013  on the transmission and close the retainer.

GWWA10-1681Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Engage the :VAS6100  with :10-222A/2  on the lifting tackle.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

GWWA37-0214Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the transmission from the engine. Pay attention to the intermediate plate while doing so.