Engine And Transmission, Separating, Vehicles With DSG® Transmission: Procedure

WARNING: This page is about a different car, the 2015 Volkswagen Golf. However, it is still accessible from the selected car via links, so may be relevant.

Engine/transmission assembly removed and secured on the :T10497 .

-- Loosen the hose clamps -arrows- and remove the coolant hoses from the transmission fluid cooler.

GWWA10-10001

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Attach the hook of the :2024A to the transmission lifting eye.

GWWA37-10803

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Secure using a connector lock -arrow-.

-- Attach the :VAS6100 with the :10-222A/20 to the lifting tackle.

-- Free up the wiring harnesses -arrows- and the connector -1- from the bracket.

GWWA10-11009

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1 and 2- and then remove the starter from the transmission.

GWWN27-0019

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -1, 3, 5, 6, 7, 8, 9 and 10- that connect the transmission to the engine.

GWWA34-10045

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

NOTE:

The bolt -3- is accessible only after the starter is removed.

-- Remove the transmission from the engine.